General specifications
|
Number of read/write heads
|
max. 4
alternative 2 read/write heads and 2 trigger sensors
|
UL File Number
|
E87056
|
Indicators/operating means
|
LEDs 1, 2, 3, 4
|
Status indicator for read/write heads
green: command at read/write head active
yellow: approx. 1 second long, if command was successfully executed
|
LED PWR/ERR
|
green: power on
red: Hardware fault
|
LED UL
|
green: Interface Power ON/OK
|
LED Bus Error
|
red: Bus error
|
LED Data Exch
|
green: Slave is at state "Data Exchange"
|
LED DPV1
|
Yellow: not used
|
LC display
|
two-line multi-function display with 12 characters per line
configuration of the control interface and display of connected read/write heads as additional pictograms; easy and direct selection of operating commands and addressing
|
Button
|
4 keys: ESC, up, down and return
|
Electrical specifications
|
Rated operating voltage
|
20 ... 30 V DC , PELV
|
Ripple
|
≤ 10 % at 30 V DC
|
Current consumption
|
≤ 2 A incl. read/write heads
|
Power consumption
|
3.5 W Without read/write heads
|
Galvanic isolation
|
basic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff
|
Interface
|
Physical
|
RS-485
|
Protocol
|
PROFIBUS DP acc. to EN 50170
|
Transfer rate
|
9.6; 19.2; 93.75; 187.5; 500; 1500 kBit/s
3; 6; 12 Mbit/s self-synchronizing
|
Compliance with standards and directives
|
Standard conformity
|
|
|
Electromagnetic compatibility
|
EN 61326:2003
|
|
Degree of protection
|
IEC 60529:2001
|
Ambient conditions
|
Ambient temperature
|
-25 ... 70 °C (-13 ... 158 °F)
|
Storage temperature
|
-30 ... 80 °C (-22 ... 176 °F)
|
Climatic conditions
|
air humidity max. 96 %
Salt spray resistant to EN 60068-2-52
|
Shock and impact resistance
|
Oscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6
Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27
|
Mechanical specifications
|
Degree of protection
|
IP67
|
Connection
|
Read/write heads: shielded, 4-pin, M12 connector
Power supply: M12 connector
Protective earth: M6 earthing screw
PROFIBUS: M12 connector, B-coded
|
Material
|
|
|
Housing
|
powder coated aluminum
|
Installation
|
snap-on to 35 mm standard rail or screw fixing
|
Mass
|
approx. 1000 g
|