| 详细介绍： SUMMIT708烟气分析仪/燃烧效率分析仪SUMMIT708
SUMMIT708烟气分析仪/燃烧效率分析仪SUMMIT708
烟气分析仪/燃烧效率分析仪SUMMI-T708
烟气分析仪/燃烧效率分析仪SUMMIT708三合一气体燃烧效率分析仪除了测量O2/CO/CO2之外，还可做燃烧效率分析，并且结合微分温度计，配合印表储存之数据。SUMMIT708开机时进行一系列的传感器检测，以确保工作正常，SUMMIT708必须在洁净空气环境下开机，如果在开机时传感器工作不正常或没有正确归零，显示屏将显示错误信息。SUMMIT708可存储数据50笔。
烟气分析仪/燃烧效率分析仪SUMMIT708的测量温度范围：-40~800℃(-40~1472℉) ，燃烧效率：0~100% (0.1%) 各种气体的测量：O2 氧气測量：0~25% (0.1%) CO 一氧化碳測量：0~10000ppm (1ppm) CO2 二氧化碳測量：0~25% (0.1%) ；CO/CO2 比率：0~0.999
烟气分析仪/燃烧效率分析仪SUMMIT708的燃料类型：天然气、液化石油气、轻油、重油。
SUMMIT708的规格 ：
温度测量
|
量程: -40° to 1472°F, or -40° to 800°C
解析度: 1°F or °C
精确度 (K-type): 0.3%, ±2°F or ±1°C
|
Gross/Net Efficiency 燃烧效率
|
量程: 0 to 100%
解析度: 0.1%
|
Oxygen (O2) 测量
|
量程: 0 to 25%
解析度:0.1%
精确度:±0.3%
|
Carbon Monoxide (CO) 测量
|
量程: 0 to 10,000 ppm
解析度: 1 ppm
精确度: ±5 ppm or 5%, 取最大值
|
Carbon Dioxide (CO2) 测量
|
量程: 0 to 25%
解析度: 0.1%
精确度: Calculated
|
CO/CO2 Ratio
|
量程: 0 to 0.999
解析度: 0.001
精确度: Calculated
|
一般性
|
操作温度 量程: 14° to 122°F (-10° to 50°C)
电池: 3 Each “AA” alkaline
燃料: 天然气, 液化石油气, 轻油，重油
显示: 带背光LCD
数据储存: 50 组读数
时间和日期: 24 小时实时时钟
尺寸: 200mm x 90mm x 60mm
重量: 500g
关断：Failsafe
符合标准: BS7927 (and the draft BS7967)
|
|
Flue gas analyzer / combustion efficiency analyzer SUMMI-T708
Flue gas analyzer / combustion efficiency analyzer SUMMIT708 three gas combustion efficiency analyzer in addition to the measurement of O2/CO/CO2, also can be used as combustion efficiency analysis, and combining the differential thermometer, with data printing tablestorage. SUMMIT708 boot is a series of sensors to detect, to ensure normal work, SUMMIT708 must start in the clean air environment, if the sensor in the boot is not working properly or not properly return to zero, the display will show the error message. SUMMIT708 can store data 50.
Flue gas analyzer / combustion efficiency analyzer SUMMIT708 measurement temperature range: -40~800 C (-40~1472 degrees F), combustion efficiency: 0~100%(0.1%): O2 measurement of various gas oxygen measurement: 0~25% (0.1%) CO carbon monoxidemeasurements: 0~10000ppm (1ppm) CO2 two carbon dioxide measurements: 0~25% (0.1%): 0~0.999;CO/CO2 ratio
Fuel type flue gas analyzer / combustion efficiency analyzer SUMMIT708: natural gas, liquefied petroleum gas, light oil, heavy oil.
The specification of SUMMIT708:
Temperature measurement
Range: -40 ° to, 1472 ° F, 800 ° C ° to or -40
Resolution: 1 ° F to or ° C
Accuracy (K-type): 0.3%, ± 2 ° F or ± 1 ° C
Gross/Net Efficiency combustion efficiency
Range: 0 to 100%
Resolution: 0.1%
Oxygen (O2) measurement
Range: 0 to 25%
Resolution: 0.1%
Accuracy: + 0.3%
Carbon Monoxide (CO) measurement
Range: 0 to 10000 ppm
Resolution: 1 ppm
Accuracy: ± 5 ppm or 5%, the largest value
Carbon Dioxide (CO2) measurement
Range: 0 to 25%
Resolution: 0.1%
Accuracy: Calculated
CO/CO2 Ratio
Range: 0 to 0.999
Resolution: 0.001
Accuracy: Calculated
Generality
Operating temperature range: 14 ° to to 122 ° F (50 ° -10 ° to C)
Battery: 3 Each "AA" alkaline
Fuel: natural gas, liquefied petroleum gas, light oil, heavy oil
Display: with LCD backlight
Data storage: 50 readings
Date and time: 24 hour real-time clock
Size: 200mm x 90mm x 60mm
Weight: 500g
Shutdown: Failsafe
Standard: BS7927 (and the draft BS7967)
| 
放大图片
暂无相关下载
