详细介绍: AAT208Pro呼吸式酒精检测仪AAT208-Pro
AAT208Pro呼吸式酒精检测仪AAT208-Pro
使用界面:宽频LCD界面,读数精确到小数点后三位.(例如:0.023%BAC)
增加特色:
1:排气:自动清洗气室内的残留气体.
2:自动校验:全自动校验.
3容量: 99个酒精浓度读数容量.
4双色背光照明,一个警报值.
5实时时钟显示:计时格式为12/24.
6温度:温度显示为℃ 和 ℉,存储最大,最小读数.
产品说明书:
范围:低0.15~1.5‰BAC高;或低, 0.075~0.75mg/L,高;或低,0.015~0.15%BAC,高.
精确度:装船后六个月在警报点上的精确度是+/-0.01%BAC
显示:宽频LCD界面,读数精确到小数点后三位.(例如:0.023%BAC)
容忍偏差值:当接近读数允许的限制值时警报器响起.
单位转换:‰BAC,%BAC ,和mg/L
校准:用户预先校准.
自动断电时间:2分钟.
呼吸检测:连续7秒.
循环时间:大约60秒.
自动流量检测技术:自动监测连续不断的呼吸取样.
警报值标准:0.2; 0.3; 0.5; 0.8‰BAC or 0.02; 0.03; 0.05; 0.08%BAC or 0.10; 0.15; 0.25; 0.40 mg/l
电池输入:3*1.5V AAA碱性电池(报价不含)
单个尺寸:大约128 * 63 *29 mm.
质量检测标准: CE;DOT,符合澳大利亚的标准(型号2 0.05%BAC )
Using the interface: broadband LCD interface, the reading is accurate to three digits after the decimal point.(for example: 0.023%BAC)
Added features:
1: exhaust: residual gas automatic cleaning gas chamber.
2: automatic calibration: fully automatic.
The 3 capacity: 99 alcohol concentration readingcapacity.
4 double color backlight, an alarm value.
5 real time clock display: hour format for the 12/24.
6 temperature: temperature display for the C and F,stored maximum, minimum reading.
Product descrtption:
Scope: low 0.15~1.5 ‰ BAC high; or low,0.075~0.75mg/L, high 0.015~0.15%BAC, high or low,;.
Accuracy: the accuracy of shipment within six monthsafter the alarm point is +/-0.01%BAC
Display: broadband LCD interface, the reading is accurate to three digits after the decimal point. (for example: 0.023%BAC)
Tolerance deviation: when close readings allowed limitvalue when the alarm sounded.
Unit conversion:% BAC,%BAC, and mg/L
Calibration: user pre calibration.
Automatic power-off time: 2 minutes.
Breath detection: for 7 seconds.
Cycle time: about 60 seconds.
Automatic traffic detection technology: breath sampling to monitor the continuous.
The alarm value standard: 0.2; 0.3; 0.5; 0.8 ‰ BAC or 0.02; 0.03; 0.05; 0.08%BAC or 0.10; 0.15; 0.25; 0.40 mg/l
Battery type: 3*1.5V AAA alkaline batteries (not included in the estimates)
A single size: about 128 * 63 *29 mm.
Quality standards: CE; DOT, meet the Australian standards (0.05%BAC model 2)
|