详细介绍:
OMB-AI-EXP32温度记录仪 美国omega衍生阅读:…60%RH。 适宜的环境温湿度对操作者和病人都是非常重要的。当室温超过28℃,湿度大于70%RH时,易有闷热、出汗、烦燥、疲劳等反应,容易影响安定的情绪和敏捷的思维,使操作者的技术水平不能得到很好的发挥。同时病人也会出现心率快、出汗多等症状而增加手术难度;当室温低于20度时,只穿手术衣的操作者会感到冷,易影响操作动作的灵敏性和准确性,尤其是手指的细微动作。裸露的病人由于创伤机体抵抗力处于低下水平,更易发生感冒等并发症。室内湿度低,物体表面浮尘随某些动作,如铺单、开关门等造成气流改变而悬浮在空气中。手术间内外温差大,开门后部分区域的空气形成蜗流,风速增大到约手术间原风速的4倍,此时物体表面附着物迅速飘浮于空气中。根据美国CDC的调查表明手术室空气中浮游菌数在700-800cfu/m3时就有经空气感染的危险。从结果可见,手术时铺单至铺单后2小时空气污染最严重,此时正是手术阶段。由于受重力作用,室内飘尘可直接沉降到手术创
OMB-AI-EXP32温度记录仪 美国omega
高性能USB多功能I/O数据采集模
OMB-DAQ-2416
1年保修 新产品! CE OmegaCare
多通道数据采集
OMB-DAQ-2416:高性能的多功能I / O USB数据采集模块
OMB-DAQ-2416
16分或32个单端模拟输入,可扩展到32个微分/ 64单端通道
24位分辨率
热电偶或电压输入
九软件可选的电压范围:±20V 10V,±,±5V,±2.5V,±1.25V,±0.625v,±0.312v,±0.156v,和±0.078v
模拟输入可配置为热电偶(最多16个差分输入)
1000样本/秒的总吞吐量
内置的冷端补偿和开放的热电偶检测
八行高驱动数字I / O
两个32位计数器
500V之间的隔离信号的I / O和主机
omb-daq-2416-4ao还包括4个模拟输出
The OMB-DAQ-2416 and the OMB-DAQ-2416-4AO are highly accurate, multi-function measurement and control modules for the USB bus. These modules are 24-bit analog input devices for voltage or temperature, with eight digital I/O lines and two counters. In addition to the features listed, the OMB-DAQ-2416-4AO also includes four analog output channels with 16-bit resolution, ±10V output range, and an aggregate 1000 Hz update rate.
System Expansion
With the addition of an optional OMB-AI-EXP32 analog input expansion module, the number of analog input channels on the OMB-DAQ-2416 or OMB-DAQ-2416-4AO can be doubled—increasing from 16 differential/32 single-ended inputs, to 32 differential/64 single-ended inputs. The expansion module also provides an additional 16 channels of DIO, bringing the total DIO count of the mated pair to 24.
All features of the OMB-DAQ-2416 series module are included when the OMB-AI-EXP32 is attached, including the ability to accommodate thermocouples on any input channel, built-in cold junction compensation, and open thermocouple detection. The OMB-AI-EXP32 can be plugged directly into a OMB-DAQ-2416 series module. The packaging for the OMB-DAQ-2416 series and the OMB-AI-EXP32 ensures ease of use in a variety of applications. Detachable screw terminals facilitate attaching and removing without re-wiring. The modules can easily be DIN-rail mounted for rack applications.
Software
The OMB-DAQ-2416 modules ship with an impressive array of software, including the new TracerDAQ?, a full-featured, out-of-the-box data logging, viewing, and analysis application. Driver support and detailed example programs are included for Universal Library programming libraries for Microsoft? Visual Studio? programming languages, and other languages, including DASYLab?, and ULx for NI LabVIEW? (comprehensive library of VIs and example programs compatible with 32-bit and 64-bit LabVIEW v8.5 through 2012) and InstaCalTM installation, calibration and test utility-powerful solutions for programmers and nonprogrammers alike. These modules operate under Microsoft Windows? XP (32-bit only) and VISTA/7/8 (32-bit and 64-bit) operating systems.
The OMB-DAQ-2416 Series data acquisition modules are supplied with TracerDAQ software which is a collection of four virtual instrument applications used to graphically display and store input data and generate output signals:
Strip Chart—Log and graph values acquire from analog inputs, digital inputs, temperature inputs and counter inputs
Oscilloscope—Display values acquired from analog inputs
Function Generator—Generate waveforms for analog outputs
Rate Generator—Generate waveforms for counter outputs
TracerDAQ PRO is an enhanced version of TracerDAQ. A comparison of some of the features included in TracerDAQ vs TracerDAQ PRO is shown below.
规格
A/D CONVERTER
(OMB-DAQ-2416, OMB-DAQ-2416-4AO)
A/D Converter Type: 24-bit sigma delta
A/D Data Rates:3750 samples/sec (S/s), 2000 S/s, 1000 S/s, 500 S/s, 100 S/s, 60 S/s, 50 S/s, 25 S/s, 10 S/s, 5 S/s, 2.5 S/s
Input Isolation: 500 Vdc min between field wiring and USB interface
Common Mode Rejection: Thermocouple mode, 110 dB; voltage mode, 90 dB
ANALOG INPUTS
(OMB-DAQ-2416, OMB-DAQ-2416-4AO, OMB-AI-EXP32)
Number of Channels: 16 differential/32 single-ended (thermocouples require differential mode) on OMB-DAQ-2416 or OMB-DAQ-2416-4AO. The OMB-AI-EXP32 is a multiplexer-based channel expansion module that adds an additional 16 differential/32 single ended channels.
Maximum Input Voltage: ±30V (power on), ±10V (power off)
Input Impedance: 2 GΩ (power on), 390 Ω (power off)
Input Leakage Current: ±10.6 nA (OMB-DAQ-2416, OMB-DAQ-2416-AO); ±20 nA (OMB-AI-EXP32); ±1μA max for input voltage >±30 V
Input Capacitance: 590 pF
Crosstalk: 100 dB adjacent channels
Channel Gain Queue: Up to 64 elements, software configurable channel and range
Warm-Up Time: 45 minutes max (OMB-DAQ-2416, OMB-DAQ-2416-4AO); 15 minutes max (OMB-AI-EXP32)
Open Thermocouple Detect: Automatically enable when a channel is configured for a thermocouple sensor.
CJC Sensor Accuracy: ±0.15°C typical (15 to 35°C); ±0.5°C max (0 to 55°C)
ANALOG OUTPUT
(OMB-DAQ-2416-4AO ONLY)
Number of Channels: 4
Resolution: 16-bit
Range: ±10 Vdc
Absolute Accuracy: ±16.0 LSB
Relative Accuracy: ±4.0 LSB
Differential Non-Linearity: ±0.25 LSB typical; ±1 LSB max
Current: ±3.5 mA max
Power On and Reset State: DACs cleared to zero scale, 0V ± 50 mV
Noise: 30 μVRMS
Settling Time: 45 μs
Slew Rate: 1.0 V/μs
Throughput: Single channel, 1000 S/s (max, system dependent); multiple channels, 1000 S/s divided by the number of channels (max, system dependent)
ANALOG INPUT/OUTPUT
CALIBRATION
Recommended Warm-Up Time: 45 minutes max
Calibration: Firmware calibration
Calibration Interval: 1 year
Calibration Reference: 10.000V, ±5 mV max; actual measured values stored in EEPROM
Tempco: 5 ppm/°C max
Long Term Stability: 30 ppm/1000 hrs
DIGITAL INPUTS
(OMB-DAQ-2416, OMB-DAQ-2416-4AO, OMB-AI-EXP32)
Number of Digital I/O
Channels: 8 (OMB-DAQ-2416, OMB-DAQ-2416-4AO); 16 (OMB-AI-EXP32)
Configuration: Each DIO bit can be independently read from (DIN) or written to (DOUT). The DIN bits can be read at any time whether the DOUT is active or tri-stated.
Voltage Range: 0 to 15 Vdc
Type: CMOS (Schmitt trigger)
Characteristics: 47 kΩ pull-up/pulldown resistor, 28 kΩ series resistor
Maximum Input Voltage Range: 0 to 20 Vdc max (power on/off, relative to DGND)
Pull-Up/Pull-Down Configuration: All pins pulled up to 5V via individual 47 kΩ resistors (default configuration); pull-down capability is available by moving internal jumper
Transfer Rate (Software Paced): 500 port reads or single bit reads per second typical
Input High Voltage: 1.3V min, 2.2V max
Input Low Voltage: 1.5V max, 0.6V min
Schmitt Trigger Hysteresis: 0.4V min, 1.2V max
DIGITAL OUTPUTS
(OMB-DAQ-2416, OMB-DAQ-2416-4AO, OMB-AI-EXP32)
Number of Digital I/O Channels:
8 (OMB-DAQ-2416, OMB-DAQ-2416-4AO); 16 (OMB-AI-EXP32)
Configuration: Each DIO bit can be independently read from (DIN) or written to (DOUT). The DIN bits can be read at any time whether the DOUT is active or tri-stated.
Characteristics: 47 kΩ pull-up, open drain DMOS transistor
Pull-Up Configuration: All pins pulled up to 5V via individual 47 kΩ resistors by default
Transfer Rate (Software Paced): 500 port writes or single bit writes per second typical
Output Voltage Range: 0 to 5V (no external pull-up resistor, internal 47 kΩ resistors connected to 5V by default); 0 to 15V max
Drain to Source Breakdown Voltage: 50V min
Off-State Leakage Current: 0.1 μA
Sink Current Capability: 150 mA max continuous per output pin; 150 mA max continuous for all eight channels
DMOS Transistor On-Resistance (Drain to Source): 4 Ω
COUNTERS
(OMB-DAQ-2416, OMB-DAQ-2416-4AO)
Number of Channels: 2
Resolution: 32-bit
Counter Type: Event counter
Input Type: Schmitt trigger, rising edge triggered
Counter Read/Write Rates (Software Paced): 500 reads or writes per second (system dependent)
Input Characteristics: 562 kΩ pull-up resistor to 5V, 10 kΩ series resistor
Input Voltage Range: ±15V max
Maximum Input Voltage Range: ±20V max (power on/off)
Input High Voltage: 1.3V min, 2.2V max
Input Low Voltage: 1.5V max, 0.6V min
Schmitt Trigger Hysteresis: 0.4 min, 1.2V max
Input Bandwith (-3dB): 1 MHz
Input Capacitance: 25 pf
Input Leakage Current: ±120 nA
Input Frequency: 1 MHz max
High Pulse Width: 500 ns min
Low Pulse Width: 500 ns min
GENERAL
OMB-DAQ-2416, OMB-DAQ-2416-4AO
DATA ACQUISITION MODULES
Memory: EEPROM
Microcontroller: One high-performance 8-bit RISC microcontroller with USB interface (non-isolated); one high-performance 16-bit RISC microcontroller for measurements (isolated)
Power: 5V ±5%, 340 mA supplied by included AC adaptor (OMB-DAQ-2416-ADAP)
User Output Voltage: 5V, 10 mA max available (pin 35)
Isolation: 500 Vdc min measurement system to PC
USB Device Type: USB 2.0 (full-speed)
Device Compatibility: USB 1.1, USB 2.0
USB Cable Length: 5 m (16') max
Dimensions: 245 L x 146 W x 50 mm H (9.6 x 5.7 x 2.0")
Input Connections: Detachable screw terminal blocks (accept 16 to 30 AWG wire)
Operating Temperature: 0 to 50°C (32 to 122°F), 0 to 90% RH non-condensing
Storage Temperature: -40 to 85°C (-40 to 185°F)
Weight: 463 g (16.3 oz)
OMB-AI-EXP32
EXPANSION MODULE
User Output Voltage:
+5 V, 10 mA max available (pin 19)
Dimensions: 245 L x 146 W x 50 mm H (9.6 x 5.7 x 2.0")
Input Connections: Detachable screw terminal blocks (accept 16 to 30 AWG wire)
Operating Temperature: 0 to 50°C (32 to 122°F), 0 to 90% RH non-condensing
Storage Temperature: -40 to 85°C (-40 to 185°F)
Weight: 400 g (14.1 oz)
产品型号 产品描述
OMB-DAQ-2416 Multi-function I/O USB data acquisition module
OMB-DAQ-2416-4AO Multi-function I/O USB data acquisition module with 4 analog outputs
Expansion Module
OMB-AI-EXP32 Expansion module with frequency measurement and digital I/O
选配件
OMB-DAQ-2416-ADAP Spare USA AC adaptor
OMB-DAQ-2416-PL-AU Spare Australian plug for AC adaptor
OMB-DAQ-2416-PL-EU Spare European plug for AC adaptor
OMB-DAQ-2416-PL-UK Spare UK plug for AC adaptor
OMB-CA-179-1 Spare USB cable, 1 m (3.2')
OMB-CA-179-3 USB cable, 3 m (9.8')
OMB-CA-179-5 USB cable, 5 m (16.4')
OMB-ACC-202 DIN rail adaptor kit for OMB-DAQ-2416 Series
OMB-ACC-216 Spare detachable screw terminal kit (set of 6 screw terminal blocks) for OMB-DAQ-2416 and OMB-DAQ-2416-4AO
SWD-TRACERDAQ-PRO TracerDAQ Pro software
OMB-AI-EXP32温度记录仪 美国omega
OMB-AI-EXP32温度记录仪 美国omega衍生阅读:软件温湿度传感器|温湿度采集器 编辑 本词条缺少概述、信息栏、名片图,补充相关内容使词条更完整,还能快速升级,赶紧来编辑吧! 目录 1 引言 2 温湿度传感器 引言编辑 温度:度量物体冷热的物理量,是国际单位制中7个基本物理量之一。在生产和科学研究中,许多物理现象和化学过程都是在一定的温度下进行的人们的生活也和他密切相关。 湿度:湿度很久以前就与生活存在着密切的关系,但用数量来进行表示较为困难。对湿度的表示方法有绝对湿度、相对湿度、露点、湿气与干气的比值(重量或体积)等等。日常生活中最常用的表示湿度的物理量使空气的相对湿度。用%RH表示。在物理量的导出上相对湿度与温度有着密切的关系。一定体积的密闭气体,其温度越高相对湿度越低,温度越低,其相对湿度越高。其中涉及到复杂的热力工程学知识。 温湿度传感器编辑 由于温度与湿度不管是从物理量本身还是在实际人们的生活中都有着密切的关系,所以温湿度一体的传感器就会相应产生。
OMB-AI-EXP32温度记录仪 美国omega相关产品:
LC8300-1.00-20K称重传感器 美国omega
|