| 详细介绍：
TR200手持式粗糙度仪Roughness tester
该仪器适用于生产现场，可测量多种机加工零件的表面粗糙度，根据选定的测量条件计算机相应的参数，在液晶显示器上清晰地显示全部测量结果及图形,并可在打印机上输出，亦可与PC机进行通讯。
功能特点：
● 高精度电感传感器
● 可测量显示13个粗糙度参数
● 采用DSP(数字信号处理器)进行数据处理和控制，速度快，功耗低
● 机电一体化设计，体积小，重量轻，使用方便
● 高品质锂离子充电电池，容量高，无记忆效应，连续工作时间大于20小时
● 连接时代TA系列打印机，可以打印测量参数及轮廓
● 标准RS232接口，可与PC机通讯
● 可选配曲面传感器测量曲面，小孔传感器测量内孔孔壁，沟槽/深槽传感器测量沟槽底部或台阶的粗糙度
● 菜单操作方式
● 具有图形显示功能
● 传感器触针位置指示
● 带存储功能的自动关机
● 多语言工作方式选择
技术参数：
|
测量参数
|
Ra、Rz、Ry、Rq、Rt、Rp、Rv、Rmax、R3z、RSk、RS、RSm、Rmr
|
|
测量范围
|
Ra:0.025-12.5μm
|
|
显示范围
|
Ra、Rq：0.005-16μm，Rz、Ry、Rt、Rp、Rv、Rmax、R3z：0.02-160μm
RS、RSm：1mm，Rmr：0-100%（%Rt），Rsk：0-100%
|
|
量程范围
|
±20μm、±40μm、±80μm
|
|
最高显示分辨率
|
0.001μm
|
|
滤波方式
|
RC、PC-RC、GAUSS、D-P
|
|
取样长度
|
0.25mm、0.8mm、2.5mm、自动
|
|
评定长度
|
1L-5L（可选），L为取样长度
|
|
测量行程长度
|
3L-7L（可选）
|
|
最大驱动行程长度
|
17.5mm/0.71inch
|
|
最小驱动行程长度
|
1.3mm/0.052inch
|
|
示值误差
|
≤±10％
|
|
示值变动性
|
≤6％
|
|
针尖角度
|
90°
|
|
显示方式
|
128×64点阵液晶（带背光）
|
|
工作环境
|
温度：0ºC- 40ºC，相对湿度：＜90%
|
|
重量
|
440g
|
|
外型尺寸
|
140×52×48mm
|
基本配置：主机、TS100标准传感器、电源适配器、多刻线样板、传感器护套、支架
可选附件：
TS110曲面传感器 、TS120小孔传感器、TS130沟槽传感器、TS131深槽传感器、TA610测量平台、TA620测量平台、TA630微调平台、TA631微调平台、TA230微型打印机、侧向转接杆、接长杆、V型块、连接体部件、驱动器连接轴、PC软件
TR200 handheld roughness tester Roughness tester
The instrument is suitable for the production site, canmeasure a variety of machined parts of the surfaceroughness parameters measurement conditions,according to the selected computer corresponding,clearly show that all measurement results and graphics in the liquid crystal display, and print it on a printer, can alsocommunicate with PC.
Function characteristics:
● high precision inductance sensor
● can measure 13 roughness parameter display
● using DSP (digital signal processor) for data processing and control, high speed, low power consumption
The electromechanical integration design, small volume,light weight, easy to use
● high-quality lithium ion rechargeable battery, high capacity, no memory effect, continuous working time more than 20 hours
● connected age TA series printer, you can print the measurement parameters and profile
The standard RS232 interface, can be in communication with the PC machine
● optional sensor surface hole sensor measuring surface,inner hole, trench / deep groove sensor to measure thetrench bottom or step roughness
● menu operation method
● with graphic display function
● sensor needle position indicator
Automatic shutdown, with memory function
Select the language work
Technical parameters:
Measurement parameters
Ra, Rz, Ry, Rq, Rt, Rp, Rv, Rmax, R3z, RSk, RS, RSm,Rmr
Measuring range
Ra:0.025-12.5 μ
Display range
Ra, Rq:0.005-16 μ m, Rz, Ry, Rt, Rp, Rv, Rmax, R3z:0.02-160 μ
RS, RSm:1mm, Rmr:0-100% (%Rt), Rsk:0-100%
Range
± 20 μ m, ± 40 μ m, ± 80 μ M
The maximum display resolution
0.001 μ
Filter
RC, PC-RC, GAUSS, D-P
The sampling length
0.25mm, 0.8mm, 2.5mm, automatic
Evaluation length
1L-5L (optional), L is the sampling length
Measuring the length of stroke
3L-7L (optional)
Maximum drive stroke length
17.5mm/0.71inch
Minimum drive stroke length
1.3mm/0.052inch
Error of indication
≤± 10%
Variation of indication
6%
The tip angle
90 °
Display mode
128 * 64 dot matrix LCD (backlight)
Work environment
Temperature: 0 ° C- and 40 ° C, relative humidity: < 90%
Weight
440G
Appearance size
140 x 52 x 48mm
The basic configuration: host, TS100 sensor, power adapter, reticle templet, sensor sheath, stent
Optional accessories:
TS110 surface sensor, TS120 sensor, TS130 sensor, the trench hole TS131 deep groove sensor, TA610 measurement platform, TA620 measurement platform,TA630 platform, TA631 platform, fine-tuning fine-tuningTA230 micro printer, lateral transfer rod, extension rod, V block, connecting body parts, drive shaft, PC software
| 
放大图片
暂无相关下载
