● For developing new materials ● Grinding and dispersion to the nano and submicron size More about LMZ ● Grinding and dispersion to the nano and submicron size More about LMZ ● Possible to operate with minimum batch quantity among laboratory series 工作原理：
小型实验研究用纳米干式粉碎机 超微粉碎机NANO GETTER Laboratory Series
DMS65
● Dispersion of nano-size particles
● Ideal for making small quantity samples
More about NANO GETTERSpecifications
Model DMS65 Motor 2.2kW Grinding Chamber Volume 0.13L Batch Quantity 0.2L～0.5L Bead Diameter φ0.05mm～0.5mm LMZ Laboratory Series
MINICER
● The smallest size available in the standard mill LMZ series
● Micro beads can be used
● Evenly ground and dispersed particles achievedSpecifications
Model MINICER Motor 0.94kW Grinding Chamber Volume 0.16L Batch Quantity 0.2L～0.5L Bead Diameter φ0.1mm～1.0mm LMZ Laboratory Series
LABSTAR
● Desktop laboratory type that is a size bigger than MINICERSpecifications
Model LMZ06?LMZ075 Motor 3.7kW Grinding Chamber Volume 0.6L (LMZ), 0.75L (LME) Batch Quantity 2L ～ Bead Diameter φ0.1mm～1.0mm For foundational research
MINIZETA
● Easy maintenance with simple structureSpecifications
Model MINIZETA Motor 0.75kW Grinding Chamber Volume 0.3L Batch Quantity 0.25L～0.5L Bead Diameter φ0.3mm～1.0mm
研磨部分在设备的底部，进料通过研磨介质产生的强烈冲击和摩擦进行研磨。气流从底部侧面进入，经过研磨介质时可以冷却颗粒，同时颗粒也被气流从研磨区带到分级区。满足要求的细粉将会通过分级轮，剩下的大颗粒将会返回研磨区继续研磨。
应用：
PULVIS 特别适合于难于研磨的温敏材料。
在研磨过程中还可加入添加剂。
典型的应用如下：
- 电池材料 (阴极材料)
- 无机颜料
- 陶瓷材料
- 金属氧化物
- 工业矿物
- 玻璃，玻璃粉
- 金属氧化物（充电电池材料）
- 磁性材料（惰性气体保护）
- 石墨（锂电池阳极）
耐磨保护：
研磨部分和分级部分都可以使用陶瓷材料。